Leaks in ceilings and pipes are often bad news for a homeowner in the United States. Besides, leaks are among the most common cause of water damage to the ceiling and walls. Hence, it often leads to major issues like damaged ceiling, plaster rot, and mold that gives homeowners headaches. Even more, delays in fixing the water-damaged ceiling plaster might put people in danger. But how can homeowners repair a water-damaged plaster ceiling?
Well, looking out for a professional to fix this is often advised, but this blog will summarize how you can DIY the repair.
Steps To Fixing a water damage Plaster Ceiling
There are several processes involved in fixing a water-damaged plaster ceiling. However, if you follow these instructions, you should be able to repair the plaster ceiling.
Take down the wrecked plaster ceiling.
Plaster ceilings can expand as a result of water damage. For this reason, the first thing to do is remove the damaged ceiling plaster. Then it would help if you pinpointed where the water leaks out. Repair the source of the leak with a screwdriver or knife. After that, exercise patience until the plaster is completely dry before moving to the next stage.
Seal the cracks from water damage
After the ceilings have dried, use a shop vac together with a stiff nylon brush to remove any remaining dust or debris. If any lime residue is left, you may wash it away with a sponge and some water. Then, apply an oily dry primer-sealer to the surface after thoroughly cleaning and drying. Doing so won’t introduce any unwanted contaminants to the ceiling, and you won’t have to worry about bubbles or patching chemicals in the freshly painted area. Consistently prime the wall and give two hours for the oil to dry.
Fix the ceiling’s plaster
Multiple little composite codes will need to be used to fix the new plaster junction. For this, make coatings as soft as butter from roughly a quarter of an inch of soil. Next, cover the damaged area with this using a flexible joint knife in a parallel motion across the surface. However, when using a flexible joint knife to repair a broken component, it is best to wait for the filler to solidify before removing the knife. Careful attention is required at this stage to prevent the coat from spreading.
After some time, repeat this step above, but make sure you use less coating this time.
Fixing the Paint and Sanding
When the last application of the joint compound has dried fully, rub the whole surface vigorously to smooth the area. Then you may decorate it in any way you like with paint.
Effect of water damage on plaster ceiling
Ignoring a water-damaged plaster ceiling can cost you more money to fix over time. Besides, it is prone to the following:
- Plaster ceilings that have been severely deteriorated may fall.
- It gives more room for mold to thrive.
- Discolored spots and splotches
- Soften the plaster and makes it more susceptible to cracking and further damage.
Need Water Damage Restoration Services? PCAM Services IS HERE TO ASSIST.
Are you searching for a water damage restoration service near you? In this case, consider getting in touch with PCAM Services. We are a trusted leader in water damage restoration. Contact us immediately if you have any water damage issues. Call 206-458-5237 right now!!!